Preselector-Software

From HiQSDR
Jump to: navigation, search

HiQSDR Preselector Software configuration

To use the Preselector with Quisk and the preselector filter boards, you need to edit your quisk_conf.py

We have 12 possible filter boards and positions at the HiQSDR-Preselector Board each position was select with 4 bits on X1 connector.

First take the filter boards to the position as shown
Filter board positions

Now we are ready to setup the filters add these lines to your quisk_conf.py:

# If you use the HiQSDR hardware, set these:
# The HiQSDR_BandDict sets the preselect (4 bits) on the X1 connector.
HiQSDR_BandDict = {'160':1, '80':2, '40':3, '30':4, '20':5, '17':6, '15':7, '12':8, '10':9, '6':10, '80X':11, '40X':12 }

The first number '160' are the band and the second number :1 are the filter position.
To see the special filters 80X and 40X at filter position 11 and 12 you have to edit Quisk.

Personal tools
Namespaces

Variants
Actions
HiQSDR
HiQSDR Board
RF Bridge
HiQSDR Preselector Board
HiQSDR 10 Enclosure
HiQSDR MPPA Amplifier
Under Development
HiQSDR Maker Site's
Exhibitions
Navigation
Toolbox
Translate